While deploying a redundant Cisco UCS infrastructure for a client, I noticed half way through the deployment that the 2 chassis shown in UCSM had #1 map to the 2nd
A client contacted us for help while trying to P2V a Cisco Unity server but keep getting the following error after the process successfully starts and fails: Conversion process failed
Seeing how there hasn’t been a lot of information for troubleshooting VMware’s Capacity Planner assessment application, I thought I’d share an experience I had with Solaris servers on a project
These are the notes I took during the first time I got to set up a non redundant UCS with 1 fabric interconnect, 1 IOM and 1 chassis. Please note
I had to leave SunGard today in Mississauga and head back to an office for an interview for a potential hire. The position was for a Microsoft SC and since
Ran into this problem during the preproduction deployment at a client when I converted a DVD that the client provided me into an ISO. “A required CD/DVD drive device driver
Every wonder what happens when you accidentally activate a new firmware on the subordinate AND the primary fabric interconnect for UCS at the same time? The manual: UpgradingCiscoUCSFrom1.2.1To1.3.1.pdf specifically states
This post is actually a copy and paste of a post I made on the Cisco forum when I was updating a redundant Cisco UCS deployment for a client. See
