Ran into an interesting problem/discovery today while in the office when a colleague of mine was trying to assist someone in Montreal who had an issue. What he noticed was
I ran into an interesting problem while performing a Nortel CS1000, NET VX1200 and OCS 2007 R2 integration for a client who are trying to have users slowly migrated to
Update – February 1st, 2011: I finally managed to get a small window to do a few tests with both ESXi 4.0 Update 2 and ESXi 4.1 to complete some
While this error can be related to many reasons, I thought I’d share my experience since I ran into it a bit earlier last week while deploying View 4.5 in
Coming from a Microsoft infrastructure background, I found it fairly easy to create the vCenter database but I’ve noticed in the past that some of my colleagues who haven’t had
While the installation for VMware vCenter 4.1 isn’t a whole lot different than vCenter 4.0 or even Virtual Center 2.5, I figure I’ll write a post describing the process since
Lately I’ve been asked about how someone can go about on delaying the BIOS boot up screen for a virtual machine on ESX/ESXi because sometimes it loads so fast that
As per one of my previous posts, I updated a UCS’ firmware from 1.3(1c) to 1.3(1n) (See post here: https://blog.terenceluk.com/updating-cisco-ucs-firmware-from-131c/) as I needed to 2 blades from the chassis for
